Dorvic Brand of Hilman Rollers

Dorvic Brand of Hilman Rollers

 

Riggers Kits

riggerskit

  • Kits supplied in two capacities 20 Tonnes and 50 Tonnes. Each capacity having a choice of 2 models.
  • Containing 2 Turntables and 2 Stabilizers or alternatively (for extra maneuverability) 4 Turntables.
  • Ideal for Rigging and Maintenance Crews
  • Rigger Kits are supplied in their own high quality hand-made wooden boxes. These robust carrying cases help keep the set all together, and help prevent the loss of individual components.

20 Tonne Capacity p 7    50 Tonne Capacity p 7


Turntables & Stabilizers

Turntables

The Turntable can be located on the top of the Skate when it is desired to have complete control over the steering of the load, for example when maneuvering in confined areas where exact positioning is necessary.

Turntables can be used on any number as Skates, dependent on the nature of the load.

Stabilizers

Supplied on sizes ‘A/20’, ‘B/50’ and rigger kits only.  Are used in conjunction with Turntables, to compensate for height difference on Skates with Turntables and those without.


 General Multi-Purpose Skates with or without Turntables & Stabilizers

Skates A20 B50

 

This range of skates are normally sold in sets of 4 and can be used on their own or together with the steering accessories available.

    Skates Chart AB Only


OT – Basic Skate Design for Heavy Duty Application

OT

General Notes

  • Ideal for welding directly to the load
  • Ideal for use with guide rollers
  • Suitable for running on rails or in channels
  • Can be used inverted to act as a conveyor system

 OT Chart & Drawing p 8


OT/TB – Basic Skate Design for Heavy Duty Application with Fixing Bars Across Each End

OT-TB

General Notes

  • Ideal for bolting to the load
  • Ideal for use with guide roller
  • Suitable for running on rails or channels
  • Can be used inverted to act as a conveyor system
  • All sizes have 4 bolt holes as standard (hole centers and diameters can be altered to suit customers’ requirements if  required)

OT-TB Chart & Drawing


FT – Heavy Duty Skates with Large Load Bearing Top Plate

FT-DOWN FT-UP

General Notes

  • Suitable for either bolting or welding to the load
  • Ideal for use with guide rollers
  • Suitable for running on rails or in channels
  • Can be used inverted to act as a conveyor system
  • All model supplied with 4 standard bolt holes (hole centres and diameters can be altered to suit customers requirements if required)

FT Chart & Drawing p 9


FT/CG – Heavy Duty Skates with Large Load Bearing Top Plate & Chain Guide Groove

FT-CG

General Notes

  • General construction as per Model FT
  • Models FT/CG have the addition of a chain guide groove cut into the centre member.  This helps to keep the chain  running parallel with the body.  Also helps reduce chain wear
  • This model is recommended for applications when the skates are permanently loaded to moving over long distances
  • All models supplied with 4 standard bolt holes (hole centres and diameters can be altered to suit customers  requirements if required)
  • Suitable for either bolting or welding to the load
  • Ideal for use with guide rollers
  • Suitable for running on rails or in channels
  • Can be used inverted to act as a conveyor system

 FT-CG Chart & Drawing p 9


DFT/CG – Suitable for the Heaviest of Moving Jobs

DFT-CG

  • Supplied in 6 capacities
  • Heavy duty construction
  • Bodies of fabricated steel
  • Load-bearing centre plate heat treated
  • Special chrome alloy, heat treated chains

General Notes

  • Suitable for sustaining extreme point loadings on the heaviest of moving jobs
  • All DFT/CG models have the addition of a chain guide groove cut into the center member. This helps to keep the
  • chain running parallel with the body.  Also helps reduce chain wear
  • Suitable for either bolting or welding to the load
  • Ideal for use with guide rollers
  • Suitable for running on rails or in channels
  • Can be used inverted to act as a conveyor system
  • All models supplied with 4 standard bolt holes (hole centers and diameters can be altered to suit customers requirements if required)

DFT-CG Chart & Drawing p 10

 

 

 

error: Content is protected !!